Free sign holder for a dowel or PVC pipe
Spirit sticks, yard signs, plant markers: stick your sign to this little holder and click it onto the pole. Choose your stick and length below, then download it free.
Good to know
- Is it really free?
- Yes, and it doesn’t use up any of your daily free downloads. Sign in with Google and grab as many as you like.
- Which stick does it fit?
- Whatever you have. Pick a common dowel or PVC size, or type in your own measurement. Heads up: PVC is named by an inside size, so 1/2" pipe is really about 21.3 mm on the outside, and wooden dowels often run a hair small.
- How snug is it?
- The hole starts 0.3 mm smaller than the stick so it clicks on and stays put by itself. If yours is too tight, bump the inside up 0.2 mm; too loose, bring it down 0.2 mm.
- How do I attach the sign?
- A dab of super glue or epoxy on the flat side. Two holders, one high and one low, stop a sign from spinning on its stick.
- Any print tips?
- Leave it standing up exactly as it loads, skip supports, and use any single color. Printed that way it bends instead of snapping when you push it on.